DME10 Immersive Audio Processor 256x256 Dante 96kHz 3U

« return to previous page

NEXO DME10 Immersive Audio Processor 256x256 Dante 96kHz 3U - Main Image

NEXO DME10 Immersive Audio Processor 256x256 Dante 96kHz 3U - Image 1

NEXO DME10 Immersive Audio Processor 256x256 Dante 96kHz 3U - Image 2

NEXO DME10 Immersive Audio Processor 256x256 Dante 96kHz 3U - Image 3

NEXO DME10 Immersive Audio Processor 256x256 Dante 96kHz 3U - Image 4

Price:: RRP: £30,270.24 inc VAT
Code:: NEXDME10
Manufacturer Code:: 01DME10
Brand:: NEXO

Main Features

Up to 128 object inputs / 64 speaker outputs AFC Image object-based mixing
256x256 Matrix Mixer at 96kHz as standard
Dual Redundant power supplies for mission critical applications
Easy system design, setup, and operation via ProVisionaire Design software
Built-in processing solutions include - Dugan Automixer, Acoustic Echo Canceller, Delay Matrix, and FIR speaker processing

Built on the tried and tested Yamaha DME platform, the NEXO DME10 goes a step further than any other immersive processor by unlocking its raw processing power to users and allowing near limitless customisation.

A 256 x 256 channel open architecture processor, DME10 ships with 32 object inputs / 16 speaker outputs included as standard, expandable in blocks of 32 x 16, 64 x 32 and 128 x 64 via a flexible licensing structure. Need the full channel count for a show today but two completely independent 64 channel immersive processors tomorrow? You can do that .

With superior musical expression and sound field design, DME10 features 96kHz processing and is equipped with a wide range of DSP components that can be freely selected, connected, and configured, allowing for flexible system construction.

And such is the processing power of the DME10, separate speaker system and immersive processors are no longer required. It’s all inside DME10.

Need more than the 8 channels of parametric EQ per channel or some more dynamics at a specific point in the signal chain of your immersive design? No problem. Running 128 x 64 immersive processing only uses around 50% of the DME10’s processing resource.

Product Features

Up to 128 object inputs / 64 speaker outputs AFC Image object-based mixing
256x256 Matrix Mixer at 96kHz as standard
Dual Redundant power supplies for mission critical applications
Easy system design, setup, and operation via ProVisionaire Design software
Built-in processing solutions include - Dugan Automixer, Acoustic Echo Canceller, Delay Matrix, and FIR speaker processing

Product Specifications

Internal processing: 44.1/48/88.2/96 kHz
Latency: 2.7 msec (at Rio-D2 Analog In/Out with Dante latency at 0.25msec, Dante through out on DME10)
Memory: Parameter sets: 1000, Snapshots:10000
Cooling: Constant-speed fan x1
NC value: NC20 (1m from front panel)
Air flow: Front to Rear
Dante Interface channel count: 256 input, 256 output, redundant
Dante Interface sampling frequency: 44.1/48/88.2/96 kHz
Dante Interface bit depth: 24/32 Bit
USB audio channel count: 8 input, 8 output with SRC
USB audio sampling frequency: 44.1/48/88.2/96 kHz
Connectors / Dante: etherCON ×2 (PRIMARY / SECONDARY) 1000Base-T
Connectors / DCP: RJ45 x 1
Connectors / USB TO HOST: USB 2.0 Type-C connector for USB audio
Connectors / USB TO DEVICE: USB 2.0 Standard-A Connector for Save/Load
Connectors / Network: RJ45 x 1, 100Base-TX
Connectors / GPIO: Euroblock 16 terminals (mini) x2 (GPI x16, GPO x8, +5V power supply x4)
Connectors / MIDI: DIN 5 pin ×2 (IN, OUT)
Connectors / AC IN: AC inlet (IEC, V-Lock) x 2
Memory device specifications / Compatible formats: File format: FAT32, FAT16, FAT12
Memory device specifications / Supported capacity: Maximum media capacity: SDHC: 32 GB, SD: 2 GB
Memory device specifications / Maximum file size: FAT12: 32MB, FAT16: 2GB, FAT32:4GB
User Interface / Front panel: Rotary encoder and buttons for GUI control, Operation lock feature (Full lock or Lock except volume and mute)
User Interface / Display: 224 × 48 pixels, mono colour with brightness adjustment
Power requirements: 100V-240V 50Hz/60Hz
Power consumption: 100W
Heat dissipation: 86.3kcal/h
Operating temperature: 0°C to +40°C
Storage temperature: -20°C to +60°C
Dimensions (W x H x D): 480 x 132 x 363 mm (3U) (18.90 x 5.20 x 14.29 inch)
Weight: 9.5 kg (20.94 lbs)
Packaged weight: 13 kg (28.66 lbs)
Finish: Front panel: Aluminum (Silver and black) Munsell approximate value N9 (Silver), N2.5 (Black) Handle: Metal (black paint)
RAL approximate value: RAL 860-1 (Silver) + RAL790-4 (Black)
Battery: CR2450
Included accessories: Setup Guide, Two Euroblock plugs (16-pin, 3.50 mm pitch), Two power cords, One cable hook
Options: DCP1V4S-US/EU, DCP4S-US/EU, DCP4V4S-US/EU, DCH8
Expansion license: NX-AFC-I