WL93T Omnidirectional Condenser Mini Lav Mic 4ft Cable TQG Tan

Shure WL93T Omnidirectional Condenser Mini Lav Mic 4ft Cable TQG Tan - Main Image

Shure WL93T Omnidirectional Condenser Mini Lav Mic 4ft Cable TQG Tan - Image 1

Shure WL93T Omnidirectional Condenser Mini Lav Mic 4ft Cable TQG Tan - Image 2

Price:: RRP: £162.00 inc VAT
Code:: SHUWL93T
Manufacturer Code:: WL93T
Brand:: Shure

Main Features

Intended for wireless use, connects directly to a Shure wireless body-pack transmitter
Subminiature lavalier design; ideal size for theatre, television broadcasting, video, film, and sound reinforcement
Small, inconspicuous mounting hardware
Full, clear sound comparable to larger microphones
4ft Cable
Finish: Tan

The Shure Model WL93 Microphone is an omnidirectional, subminiature, lavalier electret condenser microphone. Its visually unobtrusive design and tailored frequency response make them ideal for body-worn applications in TV broadcasting, theatre, and sound reinforcement. It features a small microphone element that provides full, clear sound comparable to that of much larger microphones. The WL93, intended for wireless use, connects directly to a Shure wireless body-pack transmitter.

The WL93 omnidirectional miniature lavalier condenser microphone is designed for use in speech applications such as broadcast presenting, speeches, lectures and for use in houses of worship.

The WL93 is supplied with a sew-on mounting bracket, a mounting block with attached tie bar, and an acoustic windscreen to minimize wind noise in outdoor applications. It is also supplied with a dual mounting block with attached tie bar.

Product Features

Intended for wireless use, connects directly to a Shure wireless body-pack transmitter
Subminiature lavalier design; ideal size for theatre, television broadcasting, video, film, and sound reinforcement
Small, inconspicuous mounting hardware
Full, clear sound comparable to larger microphones
Smooth extended frequency response with presence rise specially tailored for chest-worn microphone operation
Controlled low-frequency rolloff reduces low-frequency clothing and room noise
Low distortion, wide dynamic range
Uniform omnidirectional polar pattern

Product Specifications

Type: Condenser (electret bias)
Frequency Response: 50 to 20,000 Hz
Polar Pattern: Omnidirectional , uniform with frequency
Output Impedance: 3000 Ω
Sensitivity: open circuit voltage: −38 dBV/Pa(13 mV)
Clipping Level at 1 kHz: 0.25 V at 120 dB
Maximum SPL: 120 dB
Dynamic Range (Maximum SPL, A-weighted): 102 dB
Self Noise: 18 dB typical , A-Weighted
Signal-to-Noise Ratio: 76 dB at 94 dB SPL (IEC 651)
Polarity: Positive pressure on microphone diaphragm produces positive voltage on pins 3 and 4 with respect to pin 1 (ground)
Power Requirements: 2 to 10 V; 5 V nominal (pin 2 to pins 3 and 4);Current Drain 40 µA typical
Environmental Conditions:
- Operating Temperature: −18 to 57°C (0 to 135°F)
- Storage Temperature: −29 to 74°C (−20 to 165°F))
Cable: 1.27 m (4.17 ft), attached , two-conductor , shielded , terminated by miniature Connector Type TA4F
Housing: Microphone: Black ABS thermoplastic case with stainless-steel-mesh grille
Weight: Microphone: 16 g (0.57 oz.)