VDO Sceptron 10 LED Video Batten 10mm Pixel Pitch 320mm

Product Features

• 10 mm pixel pitch
• 250 cd per meter calibrated
• 750 lumen per meter calibrated
• High-quality 16-bit per color image processing technology
• Pixel-level brightness and color calibration for optimal image quality
• P3/DMX controllable (automatic protocol detection)
• Intuitive mapping and addressing via P3 System Controller
• Combined power/data input (single cable for power and data input)
• Supported by integrated power and data processor (P3 PowerPort 1500 or P3 PowerPort 1000 IP) and simple cabling system

Product Specifications

General

• Control and Programming
  
  • Control options: Martin P3™ System Controller via Martin P3™ PowerPort 1500 / Martin P3™ PowerPort 1000 IP, and/or DMX
  • Protocol detection: Automatic
  • Control modes: RGB, basic, segment and pixel-level
  • Setting and addressing: P3 System Controller or RDM-compliant controller
  • Control resolution: 16-bit (P3) or 8-bit (DMX) control of each color
  • Color and intensity calibration: Pixel-level
  • DMX channels: 3/10/13/22/103/307
  • DMX compliance: USITT DMX512-
  • RDM compliance: ANSI/ESTA E1.20
  • Firmware update: Via Martin P3™ System Controller
• Control/User Interface
  • Device status: Multi-color visual indication
  • Device test and reset: Magnetic pushbutton to call up local test patterns and reset device
• Optics
  • Options:
    • Open Front
    • Flat Diffuser
    • Flat Smoked Diffuser
    • Round Diffuser
    • Round Smoked Diffuser
    • Square Diffuser (supplied as standard with fixture)
    • Square Smoked Diffuser
    • Tube Diffuser
    • Tube Smoked Diffuser
    • Minimum LED lifetime: 50 000 hours (to >70% luminous output)*

*Figure obtained under manufacturer’s test conditions. All options can be interchanged at any time.

• Photometric Data
  • Color resolution: 16 bits per color (48 bits per pixel)
  • Viewing angle: 120° x 120°
  • Pixels per meter: 100
  • Pitch (pixel center-to-center): 10.00 mm
  • Luminous intensity, calibrated mode: 250 cd per meter*
  • Total output, calibrated mode: 8 333 nits (modules spaced 30 mm center-to-center)*
  • Total output, calibrated mode: 750 lumens per meter*

*Preliminary data, figures are approximate.

• Video Processing
  • Brightness control
  • Gamma correction and control
  • Color temperature control
  • Color space control
  • Calibration processing
  • Synchronization
• Signal Protocol
  • Martin P3 (via Martin P3™ PowerPort) or DMX
• Construction
  • Base: Extruded aluminum profile
  • Color: Matt black
  • Protection rating: IP65
  • RoHS compliant
• Installation
  • Orientation: Any
  • Mounting: Slot for locking nuts on back of profile (M6) and optional sliding bracket for M12 bolt
  • Mounting options: Flat surface at any angle, pedestal or other suitable support
• Connections
  • Power and data input: 6-pin custom (BBD) IP66-rated
  • Power and data thru: 6-pin custom (BBD) IP66-rated
  • Hot plugging compatible
• Electrical
  • Nominal input voltage: 48 VDC +/- 4%
  • Power supply options: Martin P3™ PowerPort 1500, P3™ PowerPort 1000 IP, Tripix™ Power or generic 48 VDC PSU
  • Total power consumption (at max. intensity, full white): 33 W per meter
• Thermal
  • Cooling: Convection
  • Maximum ambient temperature (Ta max.): 55° C (131° F)
  • Minimum ambient temperature (Ta min.): -30° C (-22° F)
  • Total heat dissipation (calculated, +/- 10%): 115 BTU/hr per meter

Physical & Dimensions

• Length: 320mm
• Width: 27mm
• Height: 28mm
• Weight: 0.4kg