TIO1608-D2 I/O Rack Stagebox with Dante 16in /8out 96KHz

Product Features

• Stagebox for use with TF Series or DM3
• Optional NY64-D expansion card to connect three Tio1608-D2 units
• Dante high reliability network audio protocol
• Fast and easy configuration 
• Simple and flexible input selection 
• Recallable D-PRE preamplifiers 

Product Specifications

• Sampling frequency rate:  External:  44.1kHz, 48kHz, 88.2kHz, 96kHz
• Signal delay:  Less than 1.3ms INPUT to OUTPUT, connect with DM3, Dante Receive Latency set to 0.25ms (one way), Fs=96kHz; Less than 2.6ms INPUT to OUTPUT, connect with DM3, Dante Receive Latency set to 0.25ms (one way), Fs=48kHz
• Total harmonic distortion:   Less than 0.2% +4 dBu@20Hz-20kHz into 600Ω, Gain=+66 dB / Less than 0.05% +4 dBU@20Hz-20kHz into 600Ω, Gain=-6 dB, INPUT to OUTPUT, Fs=88.2kHz, 96kHz; Less than 0.1% +4 dBu@20Hz-20kHz into 600Ω, Gain=+66 dB / Less than 0.05% +4 dBU@20Hz-20kHz into 600Ω, Gain=-6 dB, INPUT to OUTPUT, Fs=44.1kHz, 48kHz *Measured with a -18 dB/octave filter @80kHz
• Frequency response:  +0.5, -1.5 dB 20Hz-20kHz, refer to the nominal output level @1kHz, INPUT to OUTPUT
• Dynamic range:  108 dB, INPUT to OUTPUT, Gain=-6 dB / 110 dB, DA Converter, Fs 96kHz; 108 dB, INPUT to OUTPUT, Gain=-6 dB / 112 dB, DA Converter, Fs 48kHz
• Hum & noise level:  Equivalent input noise -128 dBu, Gain=+66 dB, Fs 96kHz, 48kHz *Measured with A-weighting filter
• Residual output noise:  -86 dBu, Fs 96kHz / -88 dBu, Fs 48kHz, ST main off *Measured with A-weighting filter
• Crosstalk:  -100 dB, adjacent INPUT/OUTPUT channels, Input Gain = -6 dB *Measured with a -30 dB/octave filter @22kHz
• Heat dissipation:  100-240V, 50/60Hz, 43.5kcal/h
• Power requirements :  100-240V, 50/60Hz
• Power consumption:  50W
• Dimensions:  W:  480mm (18.9”)  H :  88mm (3.5”) D:  364mm (14.4”)
• Net weight:  5.7kg (12.6lbs)
• Accessories:  Owner’s Manual, Power Cord (2.5m), Rubber stoppers (4)
• Temperature Range: Operating temperature range: 0 - 40℃, Storage temperature range: -20 - 60℃

Analog Output Characteristics 

• Output Terminal:  OUTPUT 1-8
• Actual Source Impedance:  75 Ohms 
• For use With Nominal:  600 Ohms Lines 
• Output Level:  Nominal:  +4 dBu (1.23V)  Max. before clip:  +24 dBu (12.3V) 
• Connector: XLR-3-32 type *1 
• Balanced/unbalanced: Balanced 

Analog Input Characteristics 

• Input Terminals: INPUT 1-16 
• GAIN:  +66 Db -6 Db 
• Actual Load Impedance: 7.5kOhms 
• For Use with Nominal: 50-600 Ohms Mics & 600 Ohms lines 
• Input Level: Sensitivity:  -82 dBu (61.6μV) +10 dBu (245Mv)  Nominal: -62 dBu (0.616mV) +10 dBu (2.45V) Max before clip:  -42 dBu (6.16mV) +30 dBu (24.5V) 
• Connector:  Combo Jack (XLR-3-31 type *2 or TRS phone *3)
• Balanced/Unbalanced: Balanced 

Digital Input and Output Characteristics

• Terminal: Primary/Secondary 
• Format: Dante
• Data Length: 24bit or 32bit
• Level: 1000Base-T
• Audio:  16ch (Tio1608-D2 to other devises) 8ch (Other devises to Tio1608-D2)
• Connector:  etherCON Cat5e