Currently not in stock: Please contact our sales team for product availability and lead times. Thanks to our strong supplier relationships our lead times are some of the quickest in the industry, giving us full confidence that we can still fulfil your requirements on back-order quicker than any competitor.
1 unit in stock: We currently have 1 unit in stock.
2 units in stock: We currently have 2 units in stock.
3 units in stock: We currently have 3 units in stock.
4 units in stock: We currently have 4 units in stock.
5 units in stock: We currently have 5 units in stock.
6 units in stock: We currently have 6 units in stock.
7 units in stock: We currently have 7 units in stock.
8 units in stock: We currently have 8 units in stock.
9 units in stock: We currently have 9 units in stock.
10 units in stock: We currently have 10 units in stock.
11-20 units in stock: We currently have between 11-20 units in stock.
21-30 units in stock: We currently have between 21-30 units in stock.
31-40 units in stock: We currently have between 31-40 units in stock.
41-50 units in stock: We currently have between 41-50 units in stock.
51-75 units in stock: We currently have between 51-75 units in stock.
76-100 units in stock: We currently have between 76 and 100 units in stock.
101+ units in stock: We currently have at least 101 units in stock.
201+ units in stock: We currently have at least 201 units in stock.
301+ units in stock: We currently have at least 301 units in stock.
401+ units in stock: We currently have at least 401 units in stock.
501+ units in stock: We currently have at least 501 units in stock.
...
If you place your order and we've not got a product in stock, a member of the sales team will contact you with our supplier lead times or to find an alternative.
Please call the sales team on 01525 850085 or email sales@leisuretec.co.uk if you have any questions.
Wireless Microphone Systems
We do our best to keep healthy stocks across the many Wireless Microphone System SKUs but in the rare case where we don't have your required system in stock, please contact our sales team as we can often make your product to order by borrowing the system components (transmitters, receivers or mics) from other stocked systems.
Shopping Basket
The product has been added to your basket
Main Features
Transducer Type Cardioid Condenser Microphones
Delivers a sound quality found in classic larger mics
The capsule is shock-mounted in an intricate machined brass ring
Successfully minimizes acoustic reflections and diffractions
Pure, open-air sound unlike any other mic
For studio vocals, choir, piano, drums, sax, guitar and overheads
The SCX25A is a professional studio condenser microphone with an elegant design and a patented capsule suspension system. Uniquely shock-mounted within an intricate machined brass ring, the capsule is completely isolated from the mic body and electronics. By successfully minimizing acoustic reflections and diffractions, the SCX25A delivers a pure, open-air sound with exceptional detail and realism.
The SCX25A is consistent when responding to on and off-axis signals. This mic exhibits outstanding phase coherence and minimal proximity effect. With a wide cardioid polar pattern, the SCX25A enables the sound engineer to blend the sound of the instrument or vocal with the sound of the room. The SCX25A large diaphragm microphone will handle SPLs in excess of 135 dB and provides up to 20 dB of ambient noise rejection.
Affectionately referred to as “The Lollipop," The SCX25A cardioid studio condenser microphone is perfectly suited to capture the sound of acoustic instruments such as pianos, guitars, vibes, woodwinds, brass, percussion toys, drums, orchestra and symphony sections.
Product Features
Premium large diaphragm studio microphone for studio or live sound
Delivers pure open-air sound
Shock-mounted capsule suspension system
Designed, machined, assembled and tested in the USA
3-year warranty
Product Specifications
General
Transducer Type: Condenser
Frequency Response: 20 Hz - 20 kHz
Polar Pattern: Cardioid
Output Impedance: 200 ohms
Sensitivity: 28 mV / Pa @ 1k
Equivalent Noise Level: 14 dB (A-weighted)
Signal to Noise Ratio: 80 dB
Maximum SPL: ≥135 dB
Dynamic Range: 121 dB
Power Requirements: 48-52 V phantom
Connector: 3-pin XLRm
Polarity: Positive pressure on diaphragm produces a positive voltage on pin 2 relative to pin 3 of output XLR connector
Physical & Dimensions
Materials: Finish Machined Brass / Black Finish
Weight: 244 g / 8.6 oz
Length: 148 mm / 5.8 in
What's in the Box?
2 x SCX25A Condenser Microphone
2 x Metal Adapter to Accommodate 3/8" Microphone Stands
2 x CASEWOOD Foam Lined Wooden Case
2 x DCLIP Microphone Clips
Optional Accessories
APS2 - Two-channel 48 V phantom power supply. 110 V switchable to 240 V. Detachable power cord.
DFLEX - Dual pivot rim mounted clip with extra wide butterfly jaws.
STANDKD - Short pedestal stand with telescoping boom arm.
SMT25 - Low profile shock mount system with nylon cable and thumbscrew for positioning.
PD133 - Optional two-layer mesh pop diffuser for controlling acoustic plosives.
CBL20 - 20’ premium XLR-XLR balanced mic cable. Quad conductor, twisted pair with a braided shield for conductivity. 6 mm PVC jacketed.
We use cookies to provide website functionality and to analyse traffic on our website. We (and our service providers) use small text files called cookies and similar technology on your device. These cookies do not reveal your identity, web use or other behaviour. Our Cookie Statement provides more information and explains how to update your cookie settings. View our cookies policy. By clicking 'Accept All Cookies', you agree that this site using cookies. If you do not want cookies to be used, you can click the "Decline All Cookies" button, but it may have an impact on the way you experience our website and others.
