PM 502 8Ch Powered Mixer 5 Mic/Line and 3 Stereo-Line In 2x600W

Product Features

• A versatile tool for a multitude of live and installation applications8 input channels with 5 Mic/Line- and 3 Stereo-Line inputs
• User-friendly design
• 2 x 600 Watts max output power, 100V Direct Drive Option
• High-Quality FX processors, 32 editable presets
• USB interface, file player for MP3 and WAV files
• 3 Master outputs with 7-band EQ each and delay for Master B

Product Specifications

• Channels (mono + stereo):  5 + 3
  • Microphone inputs:  5 x XLR/Jack socket
  • Auxiliaries (FX, AUX):  1 Post, 1 Pre
• Max. single channel output power, dynamic headroom, IHF-A
  • into 4 Ω:  640 W
  • into 8 Ω:  350 W
• Max. dual channel output power, dynamic headroom, IHF-A
  • into 4 Ω:  2 x 600 W
  • into 8 Ω:  2 x 340 W
• Max. single channel output power, continuous, 1 kHz, THD = 1%
  • into 4 Ω:  500 W
  • into 8 Ω:  280 W
• Max. midband output power, 1 kHz, THD = 1%, dual channel
  • into 4 Ω:  2 x 450 W
  • into 8 Ω:  2 x 270 W
• Rated output power, 20-20000 Hz, THD < 0.5%, one channel loaded
  • into 4 Ω:  400 W
  • into 8 Ω:  240 W
• Max. output power, Direct Drive mode (bridge configuration), continuous, 1 kHz, THD = 1%
  • into 12 Ω:  680 W
• Max. output voltage, power amplifier, 1 kHz, no load
  • Dual channel mode:  52 Vrms
  • Direct Drive mode:  100 Vrms

THD, at 1 kHz, MBW = 22 kHz

• MIC input to master A L/R outputs, +10 dBu, typical:  < 0.015%
• MIC input to speaker output:  < 0.15%
• DIM 30, MIC input to speaker output, 3.15 kHz, 15 kHz:  < 0.05%
• IMD-SMPTE, MIC input to speaker outputs, 60 Hz, 7 kHz:  < 0.15%
• Frequency response, -3 dB, ref. 1 kHz
• Any input to any Mixer output:  15–22000 Hz
• Any input to Speaker output:  15–22000 Hz

Crosstalk, 1 kHz

• Amplifier Ch1/Ch2:  < -85 dB
• Channel to channel:  < -78 dB
• Microphone mute switch attenuation:  > 100 dB
• Channel VOL and FX/AUX send attenuation:  > 85 dB
• CMRR, MIC input, 1 kHz:  > 80 dB

Input sensitivity, all level controls in max. position

• MIC:  -65 dBu (435 µV)
• LINE (mono):  -45 dBu (4.35 mV)
• LINE (stereo):  HI: -27 dBu (34.6 mV), LO: -11 dBu (218 mV)
• CD (stereo):  -27 dBu (34.6 mV)
• Max. level, mixing desk, input VOL down, output VOL up
• MIC inputs, GAIN at min. position:  +11 dBu
• Mono line inputs, GAIN at min. position:  +30 dBu
• Stereo line inputs:  +26 dBu
• PHONES output:  +21 dBu
• MASTER A, B, AUX outputs:  +11 dBu

Input impedances

• MIC:  2 kΩ
• CD:  10 kΩ
• All other inputs:  > 15 kΩ

Output impedances

• PHONES:  47 Ω
• All other outputs
• (impedance balanced):  150 Ω

Noise, channel inputs to MASTER A L/R outputs, MBW = 22 kHz, A- weighted

• MASTER VOLUME down:  -99 dBu
• MASTER VOLUME center, all channel volume down:  -90 dBu
• MASTER VOLUME center, all channel volume center:  -85 dBu
• Signal-to-noise ratio, power amplifier, A-weighted, 450 W, 4 Ω:  104 dB
• Output stage topology, amplifier:  Class D

Equalization

• Low shelving filter:  ±15 dB / 60 H
• Mid peak filter:  ±12 dB / 2.4 kHz
• High shelving filter:  ±15 dB / 12 kHz
• Master EQ 7-band (63, 160, 400, 1k, 2.5k, 6k, 12k Hz):  ±10 dB / Q = 1.5

Filter

• Low-cut filter, microphone processing (switchable):  80 Hz, 18 dB/oct. or 150 Hz, 12 dB/oct.
• Low-cut filter, amplifier (engaged in Direct Drive mode):  50 Hz or 70 Hz, 18 dB/oct.
• Speaker processing:  LPN, switchable
• Delay MASTER B, selectable:  0–145 ms (0–50 m)

Effects

• Type:  Stereo 24/48-bit multi effects processor
• Effect presets:  32 factory presets, user editable
• Remote control:  Footswitch
• Display:  128 x 64 pixels, LCD

Audio player (USB at front panel)

• Switching mode power supply (µC controlled):  FAT 32
• Supported audio file formats:  MP3, WAV
• Interface:  USB2.0, female type A
• USB power supply, max. rated current (short circuit proof):  5 V, 500 mA

Digital audio interface (USB at rear panel)

• Channels:  2 in, 2 out
• AD/DA conversion:  16-bit, delta-sigma
• Sampling rate:  32/44.1/48 kHz
• PC interface:  USB2.0, female type B

Protection

• MASTER A, B, AUX outputs:  Adjustable peak limiters, -10 – +11 dBu
• Amplifier:  Audio limiters, high temperature, DC, HF, short circuit, peak current limiters, turn-on delay, back EMF
• Switching mode power supply (µC controlled):  Inrush current limiters, mains over/undervoltage, mains over current, high temperature
• Cooling:  Continuous speed controlled fan

Other

• Phantom power, switchable:  48 V DC
• AC power input:  100–240 V AC, 50–60 Hz
• Power consumption, at 1/8
• maximum output power, 4 Ω:  180 W
• Safety class:  I
• Operating temperature:  5° to 40° C (40° to 105° F)
• Product dimensions (Width x Height x Depth):  395 x 244 x 241 mm
• Rack-mount: 483 x 223 x 310.3 mm (7 HU)
• Net weight:  4.9 kg
• Shipping weight:  6.4 kg