ERA 150 Wash LED Moving Head 7x40W 4.2-58˚ Zoom Black

Product Features

• Light engine: LED 7 x 40W RGBW
• Full-gamut colour calibration
• CTC control: 1,800–10,000 K
• High output: 3,900 lumens
• High intensity 373,000 cd
• Zoom: 4.2 - 58˚
• Low-noise cooling system
• High-speed pan/tilt & zoom
• Weight 7.3 kg (16.1 lbs.)
• Dimensions: 276 x 176 x 356 mm (10.9 x 7.0 x 14.1 in.)

Product Specifications

PHYSICAL

• Length: 276 mm (10.9 in.)
• Width: 176 mm (7.0 in.)
• Height: 356 mm (14.1 in.)
• Weight: 7.3 kg (16.1 lbs.)

DYNAMIC EFFECTS

• Color mixing: RGBW
• Color presets: 48 color presets, virtual color wheel effects
• Color temperature control: Variable 1,800 - 10,000 K
• Electronic dimming: 0 - 100%, four dimming curve options
• Strobe and pulse effects: Variable speed and action, random strobe
• Electronic shutter effect: Instant open and blackout
• Zoom: Motorized, 4.2 - 58°
• Pan: 540°
• Tilt: 260°

CONTROL AND PROGRAMMING

• Control options: DMX, RDM
• DMX channels: 18
• 16-bit fine control: Dimming, RGB, zoom, pan and tilt
• LED color management modes: Raw, extended and calibrated
• DMX address setting: Control panel with LCD display
• DMX compliance: USITT DMX512-A
• RDM compliance: ANSI/ESTA E1.20
• Fixture software update: USB memory device or over DMX link

OPTICS

• Light source: 7 x 40 W RGBW Osram LEDs
• Minimum LED lifetime: 50,000 hours (to >70% luminous output)*
• Beam angle (half-peak): 4.2° - 38.7°
• Field angle (one-tenth peak): 5.1° - 58.6°
• Cutoff angle (3%): 5.7° - 69.6°
• Binning: Tight color and flux binning
• Calibration: Full Gamut Color Calibration
  • *Figure obtained under manufacturer's test conditions

CONSTRUCTION

• Housing: High-impact flame-retardant thermoplastic
• Color: Black
• Protection rating: IP 20

INSTALLATION

• Mounting points: 2 x quarter‐turn fastener receptacles, 106.5 mm
• Location: Indoor use only, must be fastened to surface or structure
• Orientation: Any
• Minimum distance to combustible materials: 0.5 m (1.7 ft.)
• Minimum distance to illuminated surfaces: 1 m (3.3 ft.)
• Minimum clearance around fan and air vents: 0.5 m (1.7 ft.)

CONNECTIONS

• AC power input/output: Neutrik PowerCON TRUE1 TOP
• DMX and RDM data in/out: Neutrik 5-pin locking XLR

ELECTRICAL

• AC power: 100-240 VAC (nominal), 50/60 Hz
• Typical power consumption: 315 W
• Typical half-cycle RMS inrush current at 240 VAC: 8.7 A
• Power supply unit: Auto-ranging electronic switch mode
  • *Per IEC 60898/UL489/CSA C22.2 No. 5
• Recommended Miniature Circuit Breaker: Type D*

MAXIMUM POWER AND CURRENT

• 100-120 V, 60 Hz : 3.8 A, 340 W, Power factor 0.993
• 220-240 V, 50 Hz: 1.5 A, 340 W, Power factor 0.966
  • *Measurements made at nominal voltage with all LEDs at full intensity.
• Allow for a deviation of +/- 10%.

THERMAL

• Cooling: Forced air (temperature regulated, low noise)
• Maximum ambient temperature (Ta max.): 40° C (104° F)
• Minimum ambient temperature (Ta min.): -10° C (14° F)
• Total heat dissipation (calculated): 1195 BTU/hr.
  • *Calculated, +/- 10%, at full intensity, full white

ACOUSTIC DATA

• Sound Pressure Level (LpA) @ 1 m (default regulated fan mode, full output): 37.0 dB(A)

APPROVALS

• Global CB Certification/IECEE: IEC 60598-2-17 (IEC 60598-1)
• EU safety: EN 60598-2-17 (EN 60598-1), EN 62471, EN 62493
• EU EMC: EN 55015; EN 55032; EN 55035; EN 61000-3-2, EN 61000-3-3, EN 61547
• US safety: UL 1573
• US EMC: FCC Part 15 Class B
• Canadian safety: CSA C22.2 No. 166
• Canadian EMC: ICES-003 Class B, ICES-005 Class B
• Australia/NZ: RCM
• United Kingdom: UKCA

What's in the Box?

• ERA 150 Wash
• Safety and Installation Manual
• Martin Omega bracket for rigging clamp attachment