AHM-64 64x64 Digital Matrix Inc 12x12 Local Analogue I/O 2U

Product Features

• Dante 96kHz 64x64 optional card (AES67 and DDM ready) Sold Separately
• 64x64 processing matrix
• 12x12 local analogue I/O
• I/O Port for audio networking, up to 128x128
• 128x128 built-in SLink port for audio expansion
• 64 configurable processing outputs – mono / stereo zones or speaker processing
• 96kHz FPGA core with ultra-low latency
• Compatible with IP1, IP6, IP8 remote controllers
• 2x2 local GPIO plus networkable GPIO interface
• TCP/IP protocol for third party integration
• Crestron, AMX and Extron drivers
• DC backup power supply
• Mac / Windows System Manager software
• Custom Control app and editor for BYOD
• 32 user profiles
• Integrated stereo playback
• Event scheduler

Sound management tools

• 8x Automatic Mic Mixers
• ANC (Ambient Noise Compensation)
• Priority ducking
• 8-band PEQ, dynamics and delay on every input and zone
• Speaker processing with x-over filter, delay, limiter and PEQ
• Processing expansion module

Product Specifications

Inputs

• Mic/Line Inputs:  Balanced, +48V phantom power
• Mic/Line Preamp:  Fully recallable
• Input Sensitivity:  -60 to +15dBu
• Analogue Gain:  +5 to +60dB, 1dB steps
• Pad:  -20dB Active PAD
• Maximum Input Level:  +30dBu (PAD in)
• Input Impedance:  >3kΩ (Pad out), >8kΩ (Pad in)
• Mic EIN:  -127dB with 150Ω source

Outputs

• Analogue Outputs:  Balanced, Relay protected
• Output Impedance:  <75Ω
• Nominal Output:  +4dBu = 0dB meter reading
• Maximum Output Level:  +22dBu
• Residual Output Noise:  -94dBu (muted, 20-20kHz), -92dBu (muted, 20-40kHz)

System

• Measured balanced XLR in to XLR out, 20-20kHz, +5dB Gain, Pad out, signal @ 0dB (meter)
• Dynamic Range:  110dB
• System Signal to Noise:  -94dB
• Frequency Response:  20Hz - 25kHz +0/-0.8dB
• THD+N (analogue in to out):  0.005% @ +16dBu output, 1kHz +5dB gain
• Headroom:  +18dB
• Sampling Rate:  96kHz +/- 20 PPM

Physical

• AHM-32 - without box
  • Width: 482.6mm/19"
  • Depth:  364mm/14.3"
  • Height:  91.2mm/3.6"
  • Weight:  7kg/15.5lbs
• AHM-32 - with box
  • Width:  600mm/23.6"
  • Depth:   500mm/19.7"
  • Height:  180mm/7.1"
  • Weight:  9.5kg/21lbs
• Operating Temperature Range:  0 deg C to 40 deg C (32 deg F to 104 deg F)
• Mains Power:  100-240V AC, 50-60Hz, 70W max

For detailed specifications please find the datasheet located in the downloads tab.

What's in the Box?

• AHM-64 matrix processor
• This Getting Started Guide
• Safety Sheet
• IEC mains lead
• Phoenix connectors with strain relief (1x 10-pin, 24x 3-pin, 1x 2-pin)