AEDT Dante and AES Extension Card for NXAMPMK2 Amp/Controller

« return to previous page
NEXO AEDT Dante and AES Extension Card for NXAMPMK2 Amp/Controller - Main Image
Price:
RRP: £950.27 inc VAT
Code:
NEXAEDT
Manufacturer Code:
01NX.AEDT
Brand:
NEXO

Quantity required:

Main Features

  • Adds both AES/EBU and DanteTM inputs to NXAMPmk2 Powered Controllers
  • 4 channels of DanteTM inputs with Switched/Redundant mode and 44.1 kHz to 96 kHz digital audio support
  • 2 channels of AES/EBU inputs with buffered outputs and 44.1 kHz to 96 kHz digital audio support
  • Highly flexible 4 ports gigabit switch with 4 different configuration modes
  • Remote control ports configurable as separate network or from the DanteTM network
Share:

AEDT Dante and AES Extension Card for NXAMPMK2 Amp/Controller

This extension card is compatible with NXAMPmk2 Powered Digital controllers NEXO. The heart of the NXAEDT is its network connectivity compatible with the industry standard DanteTM (or AES67) digital audio over IP network protocol. The NXAEDT can receive up to four different network streams from the same or different DanteTM sources, using 24 bits resolution. The DanteTM network sampling frequency can be 44.1, 48, 88.2 or 96 kHz for maximum compatibility.

Product Features

  • Adds both AES/EBU and DanteTM inputs to NXAMPmk2 Powered Controllers
  • 4 channels of DanteTM inputs with Switched/Redundant mode and 44.1 kHz to 96 kHz digital audio support
  • 2 channels of AES/EBU inputs with buffered outputs and 44.1 kHz to 96 kHz digital audio support
  • Highly flexible 4 ports gigabit switch with 4 different configuration modes
  • Remote control ports configurable as separate network or from the DanteTM network

Product Specifications

Digital Audio 1 Input Format

  • Digital Audio type:  DanteTM networks
  • Media type:  Standard TCP/IP over 1minimum 100 Mb / recommended 1 Gb ethernet network
  • Number of channels:  4 channels from up to 4 different DanteTM devices
  • Resolution:  24 bits
  • Sample Rate:  44.1, 48, 88.2 or 96 kHz
  • Latency:  0.25 ms to 5.0 ms (typical 1 ms)

Digital Audio 2 Input Format

  • Digital Audio type:  AES/EBU
  • Media type:  110 Ohms 3 wires twisted pair with XLR connector
  • Number of channels:  2
  • Resolution:  24 bits
  • Sample Rate:  44.1, 48, 88.2 or 96 kHz
  • Latency:  <0.07 ms

Remote Control Format

  • Network format:  Standard TCP/IP
  • Device addressing:  Automatic, based on IP address with Zeroconf

Front Panel Features

  • Digital audio 1 input/link connectors:  4x shielded 1 Gb RJ45 connectors
  • Digital audio 2 input/link connectors:  1x XLR-F and 1x XLR-M buffered output with fail safe relay
  • LEDs on network ports:  Link/Activity (Green) and Gigabit (Orange)

General Specifications

  • Height x Width x Depth (Net):  40mm x 120mm x 170mm (1.6” x 4.7” x 6.7”)
  • Height x Width x Depth (Gross):  56mm x 166mm x 225mm (2.2” x 6..5“ x 8.9”)
  • Weight (Net):  160 g
  • Weight (Gross):  300 g
  • Operating temperature range:  0° C - 40 °C (32° F - 104° F)
  • Storage temperature range:  -20° C - 60° C (-4° F - 140° F)

System Operation

  • Compatible Host:  NXAMPmk2 Powered TD Controllers

Product Downloads