The SXP118 is a compact, high-performance subwoofer that extends the low frequency operating range of a CDD-LIVE! full-range system to 40Hz — providing exceptional low frequency impact and increasing headroom. It features a long-excursion 18” (460mm)/4” (100 mm) voice coil driver with a water-resistant cone and triple roll surround in a compact reflex enclosure. The design of the 18” driver maximises output while minimising power compression and distortion, and the four reflex ports have a large frontal area to reduce turbulent air noise at very high levels. With a maximum SPL capability of 135dB peak at 1 metre, the SXP118 is the ideal subwoofer for theatre and portable live sound applications, as well as premium installations that require the maximum output from a compact enclosure.

A self-powered system, the SXP118 incorporates a Class D amplifier, DSP and Dante™ digital audio networking — simplifying set-up, enhancing control and eliminating amplifier racks. The onboard amplifier delivers 2000W peak output to the driver, and its switched-mode power supply auto-ranges to global mains voltages from 100 to 240V 50/60Hz. DSP functions — including parametric EQ, delay, muting, gain and preset selection — can be controlled over Ethernet from a PC or Windows® tablet via intuitive VU-NET™ proprietary software.

Product Features

• Compact, self-powered subwoofer
• 1 x 18” (460mm) driver with 4” (100mm) voice coil
• Onboard Class D amplification and DSP
• Dante™ Digital Audio networking
• Global mains operation with Power Factor Correction
• Tour-grade plywood enclosure with flying inserts
• IP24 rating option with rain cowl

Applications

• Live sound reinforcement
• Theatre sound
• Corporate AV events
• Fixed installations in concert halls, ballrooms and HoW
• Bars and clubs
• Outdoor restaurant, bar and hotel entertainment areas
• Concourses and Theme Parks

Product Specifications

ACOUSTICS

• TYPE: Compact, direct radiating powered subwoofer

FREQUENCY

• RESPONSE: 47Hz – 150Hz ±3dB, -10dB @ 41Hz
• DRIVER: 18” (460mm)/4” (100mm) voice coil, long excursion, ferrite magnet, waterproof cone
• INPUT SENSITIVITY:
  • -20dBu for 100dB SPL (CDD12/15 pre-set)
  • -13dBu for 100dB SPL (CDD8 pre-set)
• MAXIMUM SPL: 132dB continuous / 135dB peak
• DISPERSION: Omnidirectional / or Cardioid (paired)
• CROSSOVER: Active Presets for CDD Live 8, 12 & 15 mono-pole or cardioid (paired)

MODULE AUDIO INPUT

• CONNECTORS: Female XLR input, male XLR link output, Dante Audio Neutrik® Ethercon
• ANALOGUE INPUT IMPEDANCE: 20 kΩ balanced to ground
• MAXIMUM ANALOGUE INPUT LEVEL: 24.6 Vpp (+21dBu), over voltage protected
• INTERNAL PROCESSING: Multi-channel DSP, programmable via TCP/IP using VU-Net software
• PEQ/shelving filters
  • Up to 48dB/Oct LPF
  • Up to 200ms input delay
  • Pre-set selection via rear panel switch

NETWORK

• CONNECTORS: 2 x Neutrik® Ethercon
• PROTOCOL: TCP/IP and UDP/IP
• AMPLIFIER MODULE
• TYPE: 2 channel switch-mode, class D, Bridged Tied
• PEAK OUTPUT POWER: 2000W total
• AVERAGE EFFICIENCY: 89%
• COOLING: External fan
• MAXIMUM AMBIENT TEMPERATURE: 40°C (104°F) for full output

POWER SUPPLY

• TYPE: Switch mode, fixed frequency with PFC
• AC INPUT OPERATING RANGE: 85 – 265V ~ AC, 50 - 60Hz
• POWER FACTOR: > 0.98
• NOMINAL POWER CONSUMPTION: 125W
• MAINS CONNECTOR: Neutrik® Powercon True1

MECHANICAL

• ENCLOSURE: Extensively braced multi-laminate plywood.
• FINISH: Durable Polyurea Coating
• PROTECTIVE GRILLE: Black perforated Zintec
• FITTINGS:
  • Two skids on base, with mating channels on top
  • 16 x M8 inserts for optional castors
  • M20 top-mounted thread plate for pole mounting
  • 16 x M10 mounting points
  • 2x Bar handles, 1 on each side
  • 4x fittings for optional transit cover
• IP RATING: IP24 factory option available
• DIMENSIONS:
  • (W) 600mm x (H) 507mm x (D) 632mm (760mm including castors)
  • (W) 23.62in x (H) 20in x (D) 24.86in (29.90in including castors)
• WEIGHT: 46.5kg (103lbs) w/o castors 50kg (110lbs) with castors