{"product_id":"nanonxamp4-4ch-installation-amp-controller-4x250w-4ω-half-1u","title":"nanoNXAMP4 4Ch Installation Amplifier\/Controller 4x250W Half 1U","description":"\u003cp\u003e\u003cstrong\u003eThe nanoNXAMP4 is an installation amplifier.  It is a compact combined amplification and processing solution that significantly reduces the cost of NEXO ID and ePS Series sound systems for retail, hospitality, houses of worship, corporate and other high-quality installations.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 4-channel nanoNXAMP4 delivers 4 x 250W utilising highly reliable, ultra-low distortion Class D amplifiers and SMPS with PFC to provide the same sound quality and sonic signature as NEXO’s larger NXAMPMK2 TD Controllers. Processing uses FIR filtering for precise system EQ and linear phase compatibility, with pre-sets available for an edited range of speakers drawn exclusively from NEXO’s popular ID and ePS Series.\u003c\/p\u003e\n\u003cp\u003eOn-board mixer and matrix functions further reduce the overall cost of smaller installations, with set up and remote control enabled by an embedded web page that can be accessed via Ethernet or integrated Wi-Fi.\u003c\/p\u003e\n\u003ch2\u003eProduct Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSpeaker controller and four channels of power amplifier in a 1U, 1\/2 rack\u003c\/li\u003e\n\u003cli\u003eFour Balanced (+ unbalanced) Analog inputs (line or microphone level), SPDIF digital in\/out\u003c\/li\u003e\n\u003cli\u003eFour channel Class-D amplifiers with ultra-low distortion for uncompromised sound quality, 4 x 250 Watts\/4 ohms\u003c\/li\u003e\n\u003cli\u003eUniversal Power Supply (100~240 Volts) using PFC technology for best efficiency and smooth current drawn\u003c\/li\u003e\n\u003cli\u003eRemote control through integrated WiFi Access Point or through the ethernet port\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eProduct Specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePower Specifications:\n\u003cul\u003e\n\u003cli\u003eNumber of channels: 4x amplifier channels, 2 by 2 bridgeable\u003c\/li\u003e\n\u003cli\u003eMax. output voltage (no load): 4x 70 Volts\u003c\/li\u003e\n\u003cli\u003eMax. output power (4 channels mode \/8 Ohms load per channel): 4x 200 Watts\u003c\/li\u003e\n\u003cli\u003eMax. output power (4 channels mode \/4 Ohms load per channel): 4x 250 Watts\u003c\/li\u003e\n\u003cli\u003eMax. output power (2 channels mode \/8 Ohms load per channel): 2x 500 Watts\u003c\/li\u003e\n\u003cli\u003ePower consumption (Idle): 20 Watts\u003c\/li\u003e\n\u003cli\u003ePower consumption (Standby): \u0026lt;2 Watts\u003c\/li\u003e\n\u003cli\u003ePower consumption (Standby without network): \u0026lt;0.5 Watts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eInput to Power Out Specifications:\n\u003cul\u003e\n\u003cli\u003eFrequency response: +0\/-0.25 dB from 20 Hz to 20 kHz\u003c\/li\u003e\n\u003cli\u003eInput impedance \/ Input Sensitivity: 20 K ohms  \/ +13 dBU\u003c\/li\u003e\n\u003cli\u003eDynamic range \/ TDH + N: \u0026gt;106 dB A-weighted \/ \u0026lt;0.05% on a flat setup\u003c\/li\u003e\n\u003cli\u003eLatency: 1 ms on a flat setup\u003c\/li\u003e\n\u003cli\u003eAudio AD and DA Converters: 24 bits @ 48 kHz\u003c\/li\u003e\n\u003cli\u003eProcessing: 64 bits processing DSPs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eBack Panel Features:\n\u003cul\u003e\n\u003cli\u003eAnalog audio inputs: 4x balanced analogue inputs on Euroblock 3.5 mm pitch or unbalanced on RCA\u003c\/li\u003e\n\u003cli\u003ePower outputs: 4x Euroblock 5 mm pitch outputs\u003c\/li\u003e\n\u003cli\u003eDigital audio input\/output: 1x SPDIF 2ch input\/output on RCA\u003c\/li\u003e\n\u003cli\u003eGPIO port: 1x Euroblock 3.5 mm pitch with 4x Global purpose Inputs and 1x Global purpose Output\u003c\/li\u003e\n\u003cli\u003eNetwork inputs: 1x 100 Mb Ethernet port (Remote control)\u003c\/li\u003e\n\u003cli\u003eMains sockets: 1x IEC C14 socket\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eFront Panel and Remote Control:\n\u003cul\u003e\n\u003cli\u003eFront panel LEDs: 5x LEDs (WiFi \/ Network \/ Output \/ Input \/ Status)\u003c\/li\u003e\n\u003cli\u003eRemote control: Through 100 Mb Ethernet port or through integrated WiFi (Access Point or client)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eMains Requirements:\n\u003cul\u003e\n\u003cli\u003eMains voltage: Universal Power Supply with Active PFC 100 - 240 Volts (50\/60 Hz)\u003c\/li\u003e\n\u003cli\u003ePower consumption 1\/8 max. 4 Ohms: 250 Watts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eDimensions and Certifications:\n\u003cul\u003e\n\u003cli\u003eDimensions and weight: 1U, 1\/2 19\" Rack, 44.5 x 220 x 296 mm (1.75 x 8.66 x 11.65”), 2.8 kg (6.2 lbs)\u003c\/li\u003e\n\u003cli\u003eElectrical safety certification: IEC62368-1 2nd edition and UL62368-1\u003c\/li\u003e\n\u003cli\u003eEMC certification: FCC Part 15 Class B, CAN\/CSA-CISPR 22-10, EN55032\/CISPR32, EN61000\u003c\/li\u003e\n\u003cli\u003eGreen status: Compliant with ROHS \u0026amp; Reach directive\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"NEXO","offers":[{"title":"Default Title","offer_id":43740168192176,"sku":"NEXNANONXAMP4","price":1543.24,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0511\/4245\/9568\/files\/NEXNANONXAMP4_NEXO_03NANONXAMP4_Image_1.jpg?v=1743464442","url":"https:\/\/leisuretec.co.uk\/products\/nanonxamp4-4ch-installation-amp-controller-4x250w-4%cf%89-half-1u","provider":"Leisuretec Distribution Ltd","version":"1.0","type":"link"}