{"product_id":"int-txo-integrus-4-channel-transmitter-omneo-1u","title":"INT-TXO INTEGRUS 4-Channel Transmitter OMNEO 1U","description":"\u003cp\u003eThe INT-TXO is the central element in the INTEGRUS system that allows INTEGRUS to interact with the DICENTIS Conference System. The INT-TXO modulates the signals into carrier waves and transmits them to the radiators in the room. When connected to a DICENTIS system, the Transmitter OMNEO is fully controlled by DICENTIS and does not require any configuration.\u003c\/p\u003e\n\u003cp\u003eThe INT-TXO can also be used in Manually controlled mode. In this operation mode, the device is able to receive a combination of DICENTIS and Dante sources for maximum flexibility.\u003c\/p\u003e\n\u003ch2\u003eProduct Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eIt can be integrated with the DICENTIS Conference System or used in Manually controlled mode\u003c\/li\u003e\n\u003cli\u003eSupports DICENTIS and Dante sources\u003c\/li\u003e\n\u003cli\u003e4 channels out of the box\u003c\/li\u003e\n\u003cli\u003eUp to 28 licenses can be added to the INT-TXO for a total of 31 languages and 1 floor\u003c\/li\u003e\n\u003cli\u003eInfrared allows freedom of movement for participants\u003c\/li\u003e\n\u003cli\u003eThe Transmitter OMNEO can be connected to, and controlled by, a DICENTIS system. In this setup, it can also be powered through a DICENTIS cable, including the RSTP functionality\u003c\/li\u003e\n\u003cli\u003eThe INT-TXO can also be set to Manually controlled mode to support both DICENTIS and Dante sources. In this mode, you can configure the sources through the INT-TXO web page, which enables you to setup a system more suitable to your needs.\u003c\/li\u003e\n\u003cli\u003eThe INT-TXO can be switched to the slave mode to act as a repeater of another INT-TXO. In this case, the signal is received through the coaxial input and synchronises with the master INT-TXO. The slave mode is enabled through a switch on the rear of the device\u003c\/li\u003e\n\u003cli\u003eOnce the INT-TXO is in standby, the radiators go to power saving mode. This reduces power consumption and increases the lifespan of radiators\u003c\/li\u003e\n\u003cli\u003eIf the AUX input on the rear is activated, the audio transmitted to the analogue AUX audio input is distributed to all the infrared channels configured in the INT-TXO\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControls and indicators\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eSystem and radiator status visible at the front of the device\u003c\/li\u003e\n\u003cli\u003eTwo LEDs are located near each Ethernet connector\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInterconnections\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eDifferent power options that do not influence each other:\n\u003cul\u003e\n\u003cli\u003eDC wall adapter\u003c\/li\u003e\n\u003cli\u003eDICENTIS\u003c\/li\u003e\n\u003cli\u003ePoE\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eOne BNC connector for accepting an HF signal from another transmitter. The INT-TXO includes a switch to set the transmitter as a slave to another transmitter with synchronised audio\u003c\/li\u003e\n\u003cli\u003eSix BNC connectors to send HF signal to up to 30 radiators per output, transmitting to a total of 180 radiators\u003c\/li\u003e\n\u003cli\u003ePower through the DICENTIS system cables\u003c\/li\u003e\n\u003cli\u003eTwo DICENTIS connectors compatible with RJ45 connectors for:\n\u003cul\u003e\n\u003cli\u003eLoop through in a DICENTIS system, including RSTP\u003c\/li\u003e\n\u003cli\u003ePowering through PoE\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli style=\"font-weight: bold;\"\u003e\u003cstrong\u003eSources and channels\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eIn both operation modes, DICENTIS controlled and Manually controlled, the INT-TXO supports four sources (input channels) when it is out of the box:\n\u003cul\u003e\n\u003cli\u003eTo increase the number of sources you need to add INT-L1AL licenses\u003c\/li\u003e\n\u003cli\u003eEach INT-L1AL license increases the number of sources by one\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eIf the INT-TXO is connected to the DICENTIS system, the operation mode is set to DICENTIS controlled. In this case, the following applies:\n\u003cul\u003e\n\u003cli\u003eWith the addition of licenses, the INT-TXO can support up to 32 DICENTIS sources: the floor plus 31 interpretations\u003c\/li\u003e\n\u003cli\u003eThe audio quality is set to standard and the audio mode is set to mono. These settings apply to all sources and cannot be changed\u003c\/li\u003e\n\u003cli\u003eEach DICENTIS source, which is standard and mono, consumes one output channel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eIf the operation mode is set to Manually controlled, the following applies:\n\u003cul\u003e\n\u003cli\u003eWith the addition of licenses, the INT-TXO can support up to 32 sources. These can consist of:\n\u003cul\u003e\n\u003cli\u003eOnly DICENTIS sources\u003c\/li\u003e\n\u003cli\u003eOnly Dante sources\u003c\/li\u003e\n\u003cli\u003eA combination of DICENTIS and Dante sources\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eThe audio quality of the DICENTIS and Dante sources can be set to standard or premium:\n\u003cul\u003e\n\u003cli\u003eThe audio quality you set applies to all sources\u003c\/li\u003e\n\u003cli\u003eSetting the audio quality from standard to premium decreases the number of available channels by half because it consumes double the infrared bandwidth\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eThe DICENTIS sources are set to mono and this setting cannot be changed\u003c\/li\u003e\n\u003cli\u003eThe Dante sources can be set to mono or stereo:\n\u003cul\u003e\n\u003cli\u003eEach stereo source consumes two output channels\u003c\/li\u003e\n\u003cli\u003eTwo INT-L1AL licenses are required per stereo source\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eThe configuration of each source determines the number of channels it consumes:\n\u003cul\u003e\n\u003cli\u003eA standard mono source consumes one output channel\u003c\/li\u003e\n\u003cli\u003eA standard stereo source consumes two output channels\u003c\/li\u003e\n\u003cli\u003eA premium mono source consumes two output channels\u003c\/li\u003e\n\u003cli\u003eA premium stereo source consumes four output channels\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eThe number of sources that the INT-TXO can transmit depends on:\n\u003cul\u003e\n\u003cli\u003eThe number of INT-L1AL licenses\u003c\/li\u003e\n\u003cli\u003eThe carrier management:\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eThe INT-TXO has eight carriers available\u003c\/li\u003e\n\u003cli\u003eEach carrier allocates four output channels\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eThe settings of the sources\u003c\/li\u003e\n\u003cli\u003eFor example, when the INT-TXO is out of the box and in Manually controlled mode, you can:\n\u003cul\u003e\n\u003cli\u003eSet all sources to mono and standard:\n\u003cul\u003e\n\u003cli\u003eEach source consumes one output channel\u003c\/li\u003e\n\u003cli\u003eFour output channels are consumed in total\u003c\/li\u003e\n\u003cli\u003eEach carrier can host four mono standard sources, which means the four sources are hosted by one carrier\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eSet all sources to mono and premium:\n\u003cul\u003e\n\u003cli\u003eEach source consumes two output channels\u003c\/li\u003e\n\u003cli\u003eEight output channels are consumed in total\u003c\/li\u003e\n\u003cli\u003eEach carrier can host two mono premium sources, which means the four sources are hosted by two carriers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eProduct Specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eElectrical\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003ePower consumption:  10 W\u003c\/li\u003e\n\u003cli\u003eNominal voltage:  48 VDC\u003c\/li\u003e\n\u003cli\u003ePoE input:\n\u003cul\u003e\n\u003cli\u003ePoE IEEE 802.3af Type 1, Class 3;\u003c\/li\u003e\n\u003cli\u003ePoE IEEE 802.3at Type 1, Class 3\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eBattery type (included for backup reasons):  Lithium\u003c\/li\u003e\n\u003cli\u003eTypical battery life:  7\u003c\/li\u003e\n\u003cli\u003eNominal input level (dBV) @ 0 dB gain setting:  -18 dBV\u003c\/li\u003e\n\u003cli\u003eMaximum input level (dBV) @ 0 dB gain setting:  12 dBV\u003c\/li\u003e\n\u003cli\u003eMaximum input level (dBV) @ -6 dB gain setting:  18 dBV\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnvironmental\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eOperating temperature:  5 °C – 45 °C\u003c\/li\u003e\n\u003cli\u003eStorage temperature:  5 °C – 45 °C\u003c\/li\u003e\n\u003cli\u003eTransportation temperature:  -30 °C – 70 °C\u003c\/li\u003e\n\u003cli\u003eOperating relative humidity, non condensing:  5% – 95%\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMechanical\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eMounting type:  Rack-mounted; Tabletop\u003c\/li\u003e\n\u003cli\u003eDimensions (H x W x D):  44.45 mm x 442 mm x 390 mm (1.75 in x 17.40 in x 15.35 in)\u003c\/li\u003e\n\u003cli\u003eColour:  RAL 9017 Traffic black\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat's in the Box?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 x INT-TXO Transmitter OMNEO\u003c\/li\u003e\n\u003cli\u003e1 x DC wall adapter2 x 19” rack mounting bracket\u003c\/li\u003e\n\u003cli\u003e4 x Detachable foot\u003c\/li\u003e\n\u003cli\u003e1 x Quick installation guide\u003c\/li\u003e\n\u003cli\u003e1 x Safety and security information\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bosch","offers":[{"title":"Default Title","offer_id":56944826450298,"sku":"BSHINTTXO","price":3670.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0511\/4245\/9568\/files\/WEBBSH00026_INTTXO_1.webp?v=1780574868","url":"https:\/\/leisuretec.co.uk\/products\/int-txo-integrus-4-channel-transmitter-omneo-1u","provider":"Leisuretec Distribution Ltd","version":"1.0","type":"link"}